Vehicles
Sections
238 not categorized PORSCHE 356A REMOSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) GR2007 Lubro moly jectron removes deposits and residues from fuel distributors, injectors, and inlet valves. It eliminates problems such as hard starting, rough idle, and impaired drivability. Strong enough for fast cleaning of neglected fuel injection systems, and gentle enough for periodic use. Keep your complete fuel injection system healthy and clean. General FitmentACCESSORY
$8.56
Make a selection GR5003 Lexol multi-surface cleans, protects, and conditions leather, vinyl, and rubber. General FitmentACCESSORY
$13.70
Make a selection TM03 Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. General Fitment914 1970-76
$137.50
Make a selection TL1007 Keep your new alloy lug nuts looking new with our soft sockets. Soft sockets help you remove and reinstall your alloy lug nuts without scratching or marring like the steel sockets. General Fitment911 1965-69911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 944 1989-91 944 1985-88 944 1982-85 968 1992-95 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 914 1970-76 912 1965-69 356 1960-65 356 1950-59 924 1980-85
$19.95
Make a selection ST215 This professional-grade flywheel lock is designed to be used to secure the crank shaft from rotating during removal and reinstallation of all 6v or 12v air-cooled motors. Used in conjunction with engine holding fixture (rstp201) where the flywheel lock bolts into a machined channel. General Fitment356 1950-59356 1960-65 912 1965-69 914 1970-76 911 1965-69 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$75.55
Make a selection WAP08006110 In a rich cranberry red lightly nubbed silk, this solid tie works well with striped shirts or checked sportscoats. Porsche side-tab is the latest European style-yet easily removed. Generous 61-inch length. All silk, hand crafted in italy.
$66.76
Make a selection TM04 Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. General Fitment914 1970-76
$137.50
Make a selection SNX012 We assembled this kit of four quality sonax European cleaning products for car show last-minute detailing and weekend cleaners that want to quickly and easily add that extra gloss to their car. The dashbaord cleaner is the perfect answer to clean and protect your vehicles interior: dashboards, instrument panels and door linings. Seals both flat and textured surfaces, making them feel satiny-smooty to the touch, never oily. Works electro-statically to repel dust and dirt. The upholstery & carpet cleaner gently and thoroughly removes stubborn dirt and stains from fabrics, upholstery, door panels, carpets and ceilings. The foaming action formula is rich in cleaning agents as well as neutralizing odors and leaving ...(choose a part on the right to read more) General FitmentACCESSORY
$54.72
Make a selection 021119187 Totally discontinued by the factory and direly needed, these bellows flaps cradles hold the rod that controls the cooling. many in the past removed these flaps thinking that they were going to allow the 914 engine to cool better buy actually it makes the engine run hotter! now everyone has learned and are reinstalling the flaps, needing these cradles. engine uses two. View/Change Diagram
$10.50
Make a selection 0092700 Complete kit includes oil cooler, bypass adapter, remote filter bracket, high-temperature hose and all fittings required for installation. Fits all type 1 and type 2 thru 71. General Fitment914 1970-76912 1965-69
$165.00
Make a selection 021131285 Keep that exhaust leak from happening when you remove the restrictive air injection pump! Sold each, four caps needed. View/Change Diagram
From $4.77
Make a selection 021256251A These are the rings that fit inbetween the heat exchanger and the head and must be replaced every time the heat exchanger is removed. please make sure that the old rings are carefully removed by pinching them out rather than using a chisel that could damage the sealing surface. never stack the rings! one per cylinder! 1.7 rings have a slightly smaller interior diameter than the 2.0 variety. Four required. View/Change Diagram
From $1.00
Make a selection 111209147A No one ever knows about this part so never changes it. the result is a clogged fuel tank and a straining/failing fuel pump. easily replaced with the gas tank removed, it is also a great time to replace the sending unit and filler neck gaskets, as well as the lower fuel lines. View/Change Diagram
$9.50
Make a selection 039256251 This is the copper sealing ring between the heat exchanger and the head for all of the above captioned models. make sure you carefully remove the old seals first and do not use a chisel! seat the heat exchanger and torque the nuts in a "z" pattern. you may also want to replace the exhaust nuts. replace the studs only as necessary. View/Change Diagram
From $1.50
Make a selection 115900944020CS Double spring suspension (racing) for 924 only for 20mm spring strut mounting this sport suspension was tuned and tested for racing use only (hockenheimring.net). Perfect handling, recommended for race and clubsport. Not for street use (racing suspension). The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.
$2,633.40
Make a selection 115900944018CS Sports suspension for 924 - 944 - 968 only for 18mm spring strut mounting this sports suspension is for everyday use and increase the dynamic and response. The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.
$3,132.80
Make a selection 24135191101RS Highlights: made for up to 750*c (1,382*f) fsome track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from...(choose a part on the right to read more)
$169.40
Make a selection 21011196402 Say good bye to the days of having to weld and cut aftermarket sport cats to make them fit! We have our sport cats made in Germany to our specifications and that means that these are 100% bolt on without issue! - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume o 105 mm (4.1 inch diameter) high flow cat. - exhaust hanger brackets are included so that the heat shield does not have to be removed. - weighs 7.2 lbs. (3,2 kg). - direct bolt on replacement. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress. - made in Germany. - more distinguished flat 6 growl at wide open throttle. The FVD 200 cell...(choose a part on the right to read more)
$1,593.90
Make a selection 24135199702RS Highlights: made for up to 750*c (1,382*f) some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from ...(choose a part on the right to read more)
$299.20
Make a selection FVD612001 Battery switch that allows you to disconnect all battery functions with the simple turn of the removable key. Perfect for racing and motorsports applications. The battery master cut off switch also includes a fused link to allow low drain items like clocks and radios to draw a small current to keep them on. Installation instructions are included. Sold individually.
$28.60
Make a selection FVD721T254 Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points.
$324.50
Make a selection FVD721KVB05 Bleed your cooling system the same way your Porsche dealer does! The simplest way to completely refill the cooling system in only one operation. No air-bubbles, no problems, quick and reliable. The compact compressed air-driven appliance generates a vacuum in the entire cooling-system.this also allows the system to be tested with the built-in pressure gauge for leakage. Coolant then can be introduced into the system via the quick disconnect hose and filled using the vaccum allready in the system, pulling the coolant in from the remote canister. This ensures the cooling-system immediately works reliably with no additional work bleeding required. It practically bleeds itself. The problem solver for all water cool...(choose a part on the right to read more)
$596.20
Make a selection FVD35199607Z Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increase safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. FVD BrombacherGermany conveniently combines Porsche specific h&r spacers, the correct Porsche bolt shoulders and the correct length h&r bolts to take the guess work out of adding spacers to your car. Our spacers are cost competitive and have been developed to work together without compromise. Don't be fooled by the competition whose costs quickly add up by requiring you to order the spacers...(choose a part on the right to read more)
$102.30
Make a selection FVD50599102MM The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection FVD72269500LGW This simple FVD Brombachertow hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits all Porsche's with factory left hand thread, screw-type tow hooks. It has a two-inch towing eye, which is required for track events. It is precision cnc machined stainless steel, tig-welded, has a polished shaft and a rubber locking rod to prevent loosening. Features: stainless steel light weight: 1.6 lbs. Fits any Porsche listed in our fits these models tab. Installs in seconds, simply remove the bumper plug and screw into the tow hook hole. Made in Germany. Includes FVD Brombacherlogo. Sold individually.
$137.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |